in conjunction with the Titus 002559.835.001 square mount socket, If I drill a hole at the center line of the leg, Does the leveler accept a #2 screw driver down through the cabinet allowing one to level the legs from within the cabinet.
on 09-26-2017 02:26 PM
BEST ANSWER: The top of the leveler is open and the screw will not have anything to grab onto after you screwed through the socket.
The top of the leveler is open and the screw will not have anything to grab onto after you screwed through the socket.
You can definitely reach into the hole with an extra long flat head screwdriver and turn the base. The wider the blade the better. As a bonus, you can also use a long #2 phillips driver because the base of the leg has two slots at 90 degrees in a "plus" configuration. I have confirmed this by trying both drivers. If using a wide flat driver, hole has to be about 10 mm or 3/8" diameter.