Answer
Jan 15, 2026 - 07:05 AM
1 Position the Ø2.5 drill bit into the extension chuck so that it will bore 10 (13/32") deep
2 Place template into the front corner of the drawer
3 Bore two holes and repeat on other side
4 Attach locking devices with #6 x 5/8" deep thread wood screws (606N or 606P)
2 Place template into the front corner of the drawer
3 Bore two holes and repeat on other side
4 Attach locking devices with #6 x 5/8" deep thread wood screws (606N or 606P)
