Lamello Clamex S-20 Detachable Furniture Connector No Screws 300-Pair 145245 • No additional discounts or coupons may be applied to this product

Clamex S-20 Detachable Connector

The Clamex S-20 is a detachable connector for the Lamello System, designed for material thicknesses from 16 mm. Installed in a standard 4 mm biscuit groove and secured with screws, it provides strong, precise joints while maintaining a clean, almost invisible appearance.Featuring a discreet 6 mm access hole, the connector can be quickly connected or released using a hex key, making it ideal for both permanent and detachable assemblies. Compatible with any standard biscuit joiner, the Clamex S-20 can be used at virtually any angle and requires no glue, eliminating drying times and allowing immediate handling, installation, or shipping. Each pack includes a drill jig for accurately drilling access holes from 22.5° to 180°, ensuring fast and reliable installation.

• Detachable connector for material thicknesses from 16 mm.
• Minimal 6 mm access hole for discreet, concealed joints.
• Fits standard size 20 biscuit slots and 4 mm grooves.
• Compatible with any biscuit joiner.
• Suitable for butt joints, mitres, and angled connections.
• No glue required for faster assembly and immediate processing.
• Includes drill jig for access holes from 22.5°–180°.
• Ideal for workshop production and on-site installations.

Applications

• Cabinet and panel construction
• Mitred and angled furniture joints
• Kitchen shelving and HPL worktops
• Built-in wardrobes and custom interior fit-outs
• Wine racks, bookshelves, and premium furniture
• Thin material applications with limited connector options

Technical Specifications

• Connector Size (L × H × W): 59 × 24 × 3.9 mm
• Minimum Workpiece Width: 71 mm
• Minimum Material Thickness (Surface Cuts): 16 mm
• Minimum Material Thickness (Edge Cuts): 8 mm
• Minimum Material Thickness (Centre Wall Machining): 32 mm
• Minimum Material Thickness (Angle Bisector): 14 mm
• Installation Tolerance (Longitudinal): ±1 mm
• Installation Tolerance (Radial): ±0 mm
• Tensile Strength in Particle Board: 490 N
• Tensile Strength in MDF: 680 N
• Tensile Strength in Beech: 620 N
• Shear Strength in Particle Board: 610 N
• Shear Strength in MDF: 890 N
• Shear Strength in Beech: 1470 N