• Can be used with doors as small as 8-5/8" tall and up to 24"
• Can be mounted to the side or the top of the cabinet
• Can be installed in Face Frame and Frameless cabinets
• Can be used for very wide doors by simply adding additional mechanisms
• Simple motion speed adjustment after installation
• Multiple cover cap color choices
• Height, depth, and side adjustments by automatic cam
• Attached to the door using a standard 35mm bore
• Note: Each kit includes mechanism, left & right adapters, 2 door cups, and system screws
Technical specifications for lift system attached to the cabinet sides:
• Drilling of the door ø35.
• 13 mm deep cup.
• 85° opening with stop device (premounted).
• 94° opening without stop device.
• Minimum door height 220mm / 8-5/8”
• Maximum door height 610mm / 24”
• Possible drilling distance on the door (K): from 3 to 7 mm.
Technical information for lift system attached to the top of the cabinet:
• Use top mount for angled cabinets
• Wide or heavier doors
• 5 piece doors
• When using a top mount bracket, the overlay is reduced by 3mm. Refer to the technical sheet attached for overlay chart.
The Top Mount brackets are available as special order. Contact us to request one today.
Note: Kit includes mechanism, left & right adapters, 2 door cups, and system screws
Do Not Sell My Personal Information