Are there tactile feel differences between the 769 heavy duty with TIP-ON compared to the 763/763H standard duty with TIP-ON when both are used with the 0-44 lb L1 TIP-ON unit? Will the 769 require more force to open or pull? View answer
Asked 1 ´year ago | Undermount Drawer Slides > Blum 21" MOVENTO 769 Full Extension Soft-Close Heavy Duty Undermount Slide Blum 769.5330S
I have some large Drawers. will be around 60lbs when loaded. I am using blum 554H and they will not close the drawer empty The drawer size is 16Wx12Hx18D. Heavy with the decorative Drawer front. Can you recomend a stronger closing undermount? View answer
Asked 1 ´year ago | Undermount Drawer Slides > Blum 21" TANDEM EDGE 7/8 Extension Soft-Close Undermount Drawer Slide Blum 554H5330B01
The drawer will not close flush to the face frame. It is out 1/8"+. The slide bracket is mounted exactly 10MM (3/8") from screw hole center to front of the face frame. The slides are rear bracket mounted only. The obvious solution is to move the slide bracket inward but that leaves very little material in the faceframe for the screws. Drawers are 3/4" thick and sides are exactly 21". Work great, just won't fully close. Any thoughts? View answer
Asked 2 ´years ago | Undermount Drawer Slides > Blum 21" TANDEM plus BLUMOTION 563F Undermount Drawer Slide Blum 563F5330B
I SEE THAT THE PRICE FOR 18" TANDEM plus BLUMOTION 563 Undermount Drawer Slide Blum 563.4570B Made_In_America SKU: 11198218 563.4570B by BLUM, INC. IS $21.49 FOR A SET. What does it mean ? is it a pair or only one slide ? Thank you View answer
Asked 2 ´years ago | Undermount Drawer Slides > Blum 18" TANDEM plus BLUMOTION 563 Undermount Drawer Slide Blum 563.4570B
The instructions assume installation in frameless w/overlay door w/o Tip On Blumotion How do I calculate rail setback when using Tip On Blumotion for a frameless w/inset door installation? View answer
Asked 2 ´years ago | Undermount Drawer Slides > Blum 21" MOVENTO Waste/Recycle Set for 15" Minimum Opening Blum 769R5337SD
I need replacement slides for my kitchen drawer. My hardware appears to have an "L" and not an "A" with the following #'s 7555 / 533 0016. When I search your website I cannot locate this serial number with an "L". Can only locate the serial number with the "A". Will an "A" series with the same serial numbers work for replacement parts? Thank you Steve steve@sussmanshank.com View answer
Asked 2 ´years ago | Undermount Drawer Slides > Salice 21" Futura Full Extension Soft-Close Undermount Drawer Slide Salice A7555/533 CP6
I currently have brookhaven cabinets with the non-softclose drawer slides. The existing slides are Blum tandem 562h533-02a that has been discontinued. I would like soft close drawer slides. Is the blum tandem 563h5330-b the comparable replacement with the soft close? View answer
Asked 3 ´years ago | Undermount Drawer Slides > Blum 21" TANDEM plus BLUMOTION 563H Soft-Close Undermount Drawer Slide for 1/2" - 5/8" Drawer Side Blum 563H5330B
Since Blum is impossible to get, can I use the same size drawer boxes for these slides? We typically subtract 3/8 total form ID of the cabinet. View answer
Asked 3 ´years ago | Undermount Drawer Slides > Dynapro 16 2-D 18" Full Extension Soft-Close Undermount Drawer Slide for 5/8" Drawer Grass F130100736204
Will this slide work as an undermount for a pull-out shelf/drawer that is 13 3/8 inside by 14 3/8 wide x 22 long x 3 inch high in a pantry with a face frame with a 15 inch wide frame opening and 16 1/2 internal width? I can provide sketch if needed. Need 75 lb min, soft close. View answer
Asked 3 ´years ago | Undermount Drawer Slides > Salice 21" Futura Full Extension Soft-Close Undermount Drawer Slide Salice A7555/533 CP6
I am replacing my existing Blum slides with Blum soft-close slides. Will the existing locking devices work with the new slides or will I need to change them as well? View answer
Asked 3 ´years ago | Undermount Drawer Slides > Blum 21" TANDEM plus BLUMOTION 563F Undermount Drawer Slide Blum 563F5330B
I want to add a sliding drawer, or two, to a pantry. Depth from inside of back panel to inside of front 3/4 inch trim is 22 13/16. Will ordering a drawer box 22 inches deep with a 22 inch glide work? What type of notching is needed? Does this mount to the front trim and back of the pantry? View answer
Asked 3 ´years ago | Undermount Drawer Slides > Dynapro 22" Base Panel Mount Drawer Slide Full Extension 88lb Load Rating Grass F130107893604
