Hi. Can you tell me what the significance is of the last characters in the model number on these slides? I've seen some that have '-01B' and others that have '-02B' as the last characters. Thanks View answer
Asked 2 ´years ago | Undermount Drawer Slides > Blum 21" TANDEM plus BLUMOTION 563H Soft-Close Undermount Drawer Slide for 1/2" - 5/8" Drawer Side Blum 563H5330B
I am upgrading my slides from existing plastic runner and wheel system. I have a face frame and overlay drawer front. What is the minimum clearance between the outer edge of the drawer and the face frame. I have 9/16" on either side. Also, my drawer is 21" front to back outside not including the face. The distance from the inside of the face frame to the rear of the cabinet where I will use rear mount brackets is about 23". Are these slides long enough? View answer
Asked 2 ´years ago | Undermount Drawer Slides > Blum 21" TANDEM plus BLUMOTION 563F Undermount Drawer Slide Blum 563F5330B
Received the 1-1/8" snap in magnetic catch #555-P. Does it come in a size that is not as deep? This is for a vintage metal kitchen cabinet. The size fits in the location but is a little bit too deep. One a little less deep than the 13/16 would work better. Help View answer
Asked 2 ´years ago | Catches and Latches > 1-1/8" Snap in Magnetic Catch with Screws and Strike Aluminum Epco 555-P
I purchased both the 173H7130 (3 mm Cam Adjustable Baseplate, screw-on) and the 173H7100 (0mm Cam Adjustable Baseplate, screw-on). What does the 0 mm and 3 mm refer to? Visually I cannot tell the difference. View answer
Asked 3 ´years ago | Hinge Mounting Plates > Blum 3mm CLIP Cruciform Mounting Plate with Cam Adjustment Screw-on Blum 173H7130
The instructions assume installation in frameless w/overlay door w/o Tip On Blumotion How do I calculate rail setback when using Tip On Blumotion for a frameless w/inset door installation? View answer
Asked 3 ´years ago | Undermount Drawer Slides > Blum 21" MOVENTO Waste/Recycle Set for 15" Minimum Opening Blum 769R5337SD
I am curious on what size corner cabinet is required for a 32" Lazy Susan unit. EZR36L is the number they have on the cabinet documents. Will that be able to fit a 32" unit? View answer
Asked 3 ´years ago | Kidney Lazy Susans > Omega National Products 32" Wood Kidney 2 Shelf Lazy Susan with Swivel Bearing Natural Maple T8332K30TRDCBMNL1
The description says this is sold in multiples of 1 but also says 1 set (which to me implies 2 hardwares RH & LH per door). What is the correct quantity, 1 individual piece or 1 set, i.e. 2 per door? View answer
Asked 3 ´years ago | Sugatsune Soft-Close Mechanism-Inset 11-13/16" Double Type IF-102W-14
The drawer will not close flush to the face frame. It is out 1/8"+. The slide bracket is mounted exactly 10MM (3/8") from screw hole center to front of the face frame. The slides are rear bracket mounted only. The obvious solution is to move the slide bracket inward but that leaves very little material in the faceframe for the screws. Drawers are 3/4" thick and sides are exactly 21". Work great, just won't fully close. Any thoughts? View answer
Asked 3 ´years ago | Undermount Drawer Slides > Blum 21" TANDEM plus BLUMOTION 563F Undermount Drawer Slide Blum 563F5330B
