- Lok-level joint clamp. Polybagged with screws.
- Joins and levels wood tops and units absolutely flush without glue, dowels or splines.
Top Cannot "Bow"
Regardless of how tight the locing bolt is drawn, it exerts even pressure thereby keeping the top absolutely level
Micrometer Leveling Adjustment
Adjusting screws bear against the steel flange of the opposing member assuring positive micrometer adjustment to insure a level top
Sturdy Construction
Made of 10 gauge steel, over 1/8" thick
Easy to Install
Screw the lok-leveling clamps to the underside of panels at about 6" intervals leaving 1/32" space between clamps to allow for take up. Take up on bolts to bring joint together. Do not set up tight until panels are leveled. Use adjusting screws to level entire length of panels. Tighten bolts.