Question 1

how many Epco MC402-5-A are available View answer

Asked 1 ´year ago | Cabinet Handles & Pulls > Aluminum Wire Pull 5" Center to Center Satin Clear Anodized Epco MC402-5-A

Question 2

How does the rotating mechanism attach to a shelf. What is height of the item. View answer

Asked 1 ´year ago | Kidney Lazy Susans > Super Susan Arena Classic 32" 2-Shelf Kidney Lazy Susan Kit w/Attached Bearing Chrome/White Kessebohmer

Question 3

Is there a soft close snap on available for these hinges? Friends with Blum hinges were able to use the "Blum 973A0500.01x20 973A Blumotion Straight Arm Full Overlay Hinge for Doors" and I'm hoping there is something similar that works with Salice. Thanks View answer

Asked 1 ´year ago | Concealed European Cabinet Hinges > Salice Series 200 120° Self-Closing Hinge Full Overlay Dowel Salice C2R9A99

Question 4

are these stand alone units that slide under cabinets or do they need assembled? View answer

Asked 1 ´year ago | Omega National AG-100SVC-30, 30 W Appliance Garage Set - Straight Unit, Cherry Veneer Door

Question 5

is this track 22" in each direction? or approx 44" OAL View answer

Asked 1 ´year ago | Tambour Doors L-Shaped Track 22" L with 1-3/4" Radius Brown Omega National LT-22-BR

Question 6

Will any of these fit into a 6inch opening? I would like to make a pull-down draw and only have 6inches inside the cabinet View answer

Asked 1 ´year ago | Lid Supports and Stays > Peter Meier Delta Lift-Up or Drop-Down Lid Mechanism 810.100.060

Question 7

I've bought this mechanism, but I'm seeking an alternative hinge option for the door. Unfortunately, I don't have the pre-drilled holes required for the supplied hinges to fit into the door View answer

Asked 1 ´year ago | Sugatsune Soft-Close Mechanism-Inset 11-13/16" Double Type IF-102W-14

Question 8

can you order with longer screws for cabinets View answer

Asked 1 ´year ago | Cabinet Knobs > Berenson Contemporary Advantage Four Knob 1-1/4" Dia Brushed Nickel 9432-4BPN-P

Question 9

What is the thread pitch View answer

Asked 1 ´year ago | Square Taper Machined Wood Bun Foot 2-1/2" W x 4" H Alder Grand River BF2746-A

Question 10

What material is the product made from? View answer

Asked 8 ´months ago | Drawer Slide Accessories > Blum Tandem Side Spacer Blum T59.3570

Question 11

Is their a version in white or black? View answer

Asked 1 ´year ago | Bottom Mount Trash Pull-Outs > ENVI BMT Saphir 18" Double 50 Quart Bottom Mount Waste Container Carbon Steel Gray Vauth-Sagel

Question 12

Conflicting info, please clarify.Will this unit fit the 15" Opening ? View answer

Asked 1 ´year ago | Bottom Mount Trash Pull-Outs > ENVI BMT Saphir 18" Double 50 Quart Bottom Mount Waste Container Carbon Steel Gray Vauth-Sagel

Question 13

Which hinge plate(s) go with C2PPP99 hinge View answer

Asked 1 ´year ago | Specialty Application Hinges > Salice C2PPP99, 110° Push to Open Hinge, Inset, Screw-on

Question 14

Do not need can - just the lid - can’t find it View answer

Asked 1 ´year ago | Trash & Recycling > 32 Gallon Trash Can without Lid Gray Northern Safety 5819

Question 15

How many pieces of closet rod are included? View answer

Asked 2 ´years ago | Closet Rods and Flanges > Knape and Vogt Extra Heavy Duty Round Closet Rod 1-1/16" Diameter X 96" Chrome 770 1 96

Question 16

Will these work with frameless using undermount slides View answer

Asked 12 ´months ago | Pilaster Systems > Quicktray Pilaster Side Mounting Bracket System 1-1/4" Black Tenn-Tex B-522-03

Question 17

I have used this product on upper wall cabinets with great success. Installation is relatively simple once you read and understand the instructions for the unit you purchased. Is there any reason this product could not be installed on a base cabinet with face frame. I believe there is clearance for countertop and when fully opened the door would not inhibit the opening virtually at all. Please provide me with any opposing ideas. View answer

Asked 12 ´months ago | Aventos HL Systems > Blum AVENTOS HL Lift Mechanism for Door Weight 19lbs 4oz. to 36lbs 5oz Blum 20L2900.N5

Question 18

I noticed the part that sits on top of the fixed drawer rail only got fastened in one place... the front cabinet frame. This is because there is a gap where the back screw would be used. Is only one screw to hold in the actuator enough or would you need to use some kind of spacer allowing the second securing point? View answer

Asked 12 ´months ago | Drawer Slide Accessories > Titusoft Drawer Slide Soft Close Mechanism, Titusoft Face Frame, Titus Tool

Question 19

What are the interior basket dimensions? View answer

Asked 1 ´year ago | Closet Baskets > Rev-A-Shelf 30" x 14" x 18" Pull-Out Wire Closet Basket Satin Nickel Rev-A-Shelf CB-301418SN-3

Question 20

what is distance between screw holes? View answer

Asked 5 ´years ago | Sink Tip-Out Trays and Accessories > KV PSF8.62-W, 8-5/8 Polymer Sink Tip-Out Tray, KV Series, White, No Tab Stops, 8-5/8 L x 2 D x 3 H, Knape and Vogt

Question 21

Do you carry WM 115 sugar maple 1-side w/ cabinet liner (white) 1-side, ¾”10’x4’ View answer

Asked 1 ´year ago | Pionite Laminate Sheets > Sugar Maple II 5X12 High Pressure Laminate Sheet .036" Thick Suede Finish Pionite WM115

Question 22

How do I cut to size? View answer

Asked 1 ´year ago | Pilasters and Clips > KV 255 ZC 24, 24in 255 Series Pilaster, Surface or Flush Mount, Zinc, Knape and Vogt

Question 23

what is the width of the flat area on the 22 d shape lazy susan View answer

Asked 1 ´year ago | D-Shape Lazy Susans > Rev-A-Shelf 20" Polymer D-Shape 2 Shelf Lazy Susan White Independently Rotating Rev-A-Shelf 6272-20-11-52

Question 24

What are the thicknesses of the 909 surfaces sample chain? I am interested in a sample of the .024 product. View answer

Asked 1 ´year ago | 909 Surfaces Laminate Products > 909 Surfaces Laminates Samples Chain - FREE

Question 25

From the picture it looks like there is only 1 hole per "J Mount" to mount the door to. How many are on each mount? View answer

Asked 1 ´year ago | 78" Barn Door Hardware Kit Matte Black WE Preferred

Question 26

Are the mount brackets and screws included? View answer

Asked 1 ´year ago | Side Mount Drawer Slides > KV 8450FM 22" Side Mount Full Extension Drawer Slide Anochrome Polybag Knape and Vogt 8450FMP 22

Question 27

I need this that is deeper with one extra bin for compost View answer

Asked 1 ´year ago | Top Mount Double 10 Liter/20 Liter Pullout Under-Sink Waste Container Stainless Steel Rev-A-Shelf 8-785-30-DM2SS

Question 28

My cabinet height is 30” which super Susan should I buy? View answer

Asked 1 ´year ago | Kidney Lazy Susans > Super Susan Arena Classic 28" 2-Shelf Kidney Lazy Susan Kit w/Attached Bearing Champagne/Maple Kessebohmer

Question 29

What is the length from the center of the pie cut to the edge of the turn table for the 31 in. I am wondering about my doors being able to fit on this. View answer

Asked 1 ´year ago | 31" Wood Pie-Cut 2 Shelf Lazy Susan Natural Maple Rev-A-Shelf 4WLS942-31-52

Question 30

what mounting plate do I need for 11675226 View answer

Asked 1 ´year ago | Pie-Cut Corner with Bi-Fold Center Door Hinges > 50°/65° Corner Cabinet Hinge Overlay Screw-on Hettich 9090115

Question 31

Do you have the bar pulls in 12 or 13 mm leg diameter with 3 inches center to center View answer

Asked 1 ´year ago | Cabinet Handles & Pulls > Bar Pull Pull 3" Center to Center Venetian Bronze Epco BP030-VB

Question 32

Did you recently move the screw hole? It used to be toward the bottom and now it’s toward the middle. Your image on the product page also has it toward the bottom View answer

Asked 1 ´year ago | Concealed European Cabinet Hinges > 165° Sensys Hinge Full Overlay Soft-Closing Screw-On Nickel Hettich 9099560

Question 33

I purchased one 18" x 14" 11" pullout basket, CB-181411CR-3 as a test and want to purchase about 11 more 7" and 11" high baskets. I want to attach to the shelves and NOT the side of the framed pantry cabinets. My contractor told me that the one that I sent him can only attach to the side. Can I attach these baskets to the shelves? View answer

Asked 1 ´year ago | Closet Baskets > Rev-A-Shelf 24" x 14" x 7" Pull-Out Wire Closet Basket Chrome Rev-A-Shelf CB-241407CR-3

Question 34

will this work for epoxy coated roller sliders? View answer

Asked 1 ´year ago | Drawer Slide Accessories > WE Preferred Standard Rear Mount Brackets

Question 35

What is the height of opening of the socket for the slide? View answer

Asked 1 ´year ago | Drawer Slide Accessories > Tenn-Tex C-302, Left Hand Rear Socket for KV1805 Series Drawer Slides

Question 36

Do this come as a set? Meaning 2 pieces per order, or 1 piece? View answer

Asked 1 ´year ago | Drawer Slide Accessories > KV 8403, Rear Mount Bracket for Various Ball Bearing Slides, Knape and Vogt

Question 37

For a wall hung entertainment center with inset doors - down swinging. Looking for a small gas stay to support door? What are the blum hinges for inset and mounting plates? Thanks Jim View answer

Asked 1 ´year ago | Lid Supports and Stays > Sugatsune Adjustable Soft-Down Stay for Downward Opening Door LH Nickel NSDX-10LK

Question 38

What is the maximum cabinet width for the rod stabilizer? View answer

Asked 1 ´year ago | Aventos HL Systems > Blum AVENTOS HL Oval Stabilizer Rod Blum 20Q1061UA

Question 39

Will this fit 35 qt trash can View answer

Asked 1 ´year ago | Replacement Pull-Out Bins and Accessories > Rev-A-Shelf Blue Lid for 32 Quart Rev-A-Shelf Waste Containers Rev-A-Shelf RV-32-LID-22-1

Question 40

can the track be cut to custom length View answer

Asked 1 ´year ago | Sliding Door Track Assemblies > #2 Aluminum Sliding Door Track Kit for 3/4" By-Passing Wood Doors Satin Clear Anodized 6' Epco 2-A-6

Question 41

Hi, Description says: Adjustable depth from 22-3/4" to 24-1/2" Product details say: Depth 22-3/4. Min cabinet opening depth 22-1/4. How can one fit a 22-3/4” product into a 22-1/4” cabinet? The INSIDE measurement of my cabinet (back of face frame to cabinet back is 22-1/2”. Face frame width is 12” and height is 27.5” Will this product fit? Thank you. View answer

Asked 1 ´year ago | Top Mount Trash Pull-Outs > Rev-A-Shelf 4WCTM Top Mount Single 35 Quart Waste Container Maple Rev-A-Shelf 4WCTM-12DM1-175

Question 42

What is the purpose of the Tenso P-14 fitting? View answer

Asked 8 ´months ago | Biscuits > Tenso P-14 FRP Biscuits 66 x 27 x 9.7 mm 300 Sets Lamello 145425

Question 43

I like to use a square bit to screw these small screws in is this possible so does a square bit fit? View answer

Asked 2 ´years ago | Drawer Front Adjustment Screws > WE Preferred 1MMXP08100S2Z-4 (80330) Drawer Front Adjusting Screw, Mod Washer Head Phillips, Type 17 Auger Pt, Coarse, 1 x 8, Zinc, Bulk-1000

Question 44

are these (46790) screws a 1/2" Total or just the thread length? View answer

Asked 2 ´years ago | Hinge and Drawer Slide Installation Screws > WE Preferred 1LMXP08012R2Z-2 (46790) Hinge Bulk-5000, Slide & Hardware Screw, Mod Truss Head Phillips, Regular Pt, Coarse Thread, 1/2 x 8, Zinc

Question 45

Do you sell rolls of wire to link equiline led puck light to the power supply? The 72" is not long enough View answer

Asked 2 ´years ago | LED Cords and Connectors > Tresco 72" Ext Cord, Tresco, Used to Extend Tresco's Starter Cords, L-LED-LINKD-180-1

Question 46

The long arm and fairly thin metal of the Salice C27YA99 Pie Corner hinge is causing 1/4" sag in my corner door. It is very flimsy and won't suffice with the weight of the door. Even adding a third hinge will not likely solve the issue. Is there a heavier sag resistant hinge that would work better for me? View answer

Asked 2 ´years ago | Pie-Cut Corner with Bi-Fold Center Door Hinges > Salice C27YA99, Pie Corner Hinge, Rapido

Question 47

Does this have soft close feature? View answer

Asked 2 ´years ago | Salice 24" F70 Full Extension Push-to-Open Undermount Drawer Slide Frameless Salice G7U6P610CXB

Question 48

Can we order this item with key numbers 170 & up View answer

Asked 2 ´years ago | Lock Plugs and Cores > CompX Timberline LP300KD-121 & UP Timberline Lock Accessories, Lock Plug, Keyed Different & Master Keyed, Black

Question 49

What’s the thinnest binding available I have purchased binding in the past but don’t have the SKU View answer

Asked 2 ´years ago | File Drawer Frame Systems > Outwater 282CL-60, Clear Binning Strip

Question 50

Closed Flange for 1-1/4" and 1-5/16" Round Closet Tubing Satin Brass Epco 861-SB hi I'm looking for solid brass closed flanges for a 1" dia. PVC rod... this is close but wonder if you have 1" dia. and if it's solid brass. View answer

Asked 2 ´years ago | Closet Rods and Flanges > Closed Flange for 1-1/4" and 1-5/16" Round Closet Tubing Satin Brass Epco 861-SB

Browse by Topic