Question 1

What is the length? View answer

Asked 3 ´years ago | Wall Mount Range Hoods > Keystone 30" Wide Wall Mount Range Hood No Liner Maple VMI FDWHKS 30 M

Question 2

Why is rail design significant in clamps? View answer

Asked 8 ´months ago | Clamps

Question 3

What is the best handle design for clamps? View answer

Asked 8 ´months ago | Clamps

Question 4

Why is clutch design a key consideration in clamps? View answer

Asked 8 ´months ago | Clamps

Question 5

Why is clamping capacity important in clamps? View answer

Asked 8 ´months ago | Clamps

Question 6

I have some large Drawers. will be around 60lbs when loaded. I am using blum 554H and they will not close the drawer empty The drawer size is 16Wx12Hx18D. Heavy with the decorative Drawer front. Can you recomend a stronger closing undermount? View answer

Asked 2 ´years ago | Undermount Drawer Slides > Blum 21" TANDEM EDGE 7/8 Extension Soft-Close Undermount Drawer Slide Blum 554H5330B01

Question 7

What are the features of a clamp? View answer

Asked 8 ´months ago | Clamps

Question 8

How does fit/adjustability impact the effectiveness of face protection? View answer

Asked 8 ´months ago | Face Protection

Question 9

What are the best application/use cases for face protection products? View answer

Asked 8 ´months ago | Face Protection

Question 10

why can't i find the hinge that fits this mounting plate? View answer

Asked 2 ´years ago | Blum 3/4" Overlay COMPACT 33 Edge Mount Face Frame Mounting Plate Screw-On Blum 130.1100.22

Question 11

Why is conformability important in abrasive rolls? View answer

Asked 7 ´months ago | Abrasive Rolls

Question 12

Are these available in gray? View answer

Asked 3 ´years ago | Blum METABOX Metal Drawer Boxes > Blum 18" INSERTA Long Side Gallery Rail Set for METABOX White Blum 1810146

Question 13

How do I determine the best application/use for abrasive rolls? View answer

Asked 7 ´months ago | Abrasive Rolls

Question 14

What design features should I consider in face protection products? View answer

Asked 8 ´months ago | Face Protection

Question 15

fo rthe life of me I can NOT understand why they do not make these in bigger overlays. to match the rest oy my hing View answer

Asked 8 ´months ago | Concealed European Cabinet Hinges > Blum 155° CLIP top BLUMOTION Full Overlay Zero Protrusion Wide Angle Hinge Screw-on Installation Nickel-Plated 71B7550

Question 16

Is this a 'soft close' (no slamming), or self close that will bang if let go? View answer

Asked 2 ´years ago | Concealed European Cabinet Hinges > Blum 120° CLIP top Full Overlay Self-Closing Hinge Screw-On Installation Nickel-Plated 71T5550

Question 17

Will any of these fit into a 6inch opening? I would like to make a pull-down draw and only have 6inches inside the cabinet View answer

Asked 2 ´years ago | Lid Supports and Stays > Peter Meier Delta Lift-Up or Drop-Down Lid Mechanism 810.100.060

Question 18

How does overall length impact the use of trim bits? View answer

Asked 8 ´months ago | Trim Bits

Question 19

Will the Rev a Shelf pilaster system brackets work with different brands and styles of slides? View answer

Asked 7 ´months ago | Kitchen Pilaster Systems > Rev-A-Shelf 7/8" W Full Height Pilaster System 4 Pilasters/12 Brackets Maple 4PIL-27-088-1

Question 20

What is the height when it's pulled out? e.g. so it doesn't hit a standard 1.5in countertop overhang View answer

Asked 7 ´months ago | Cabinet Pull-Out Ironing Boards > Rev-A-Shelf Pullout Vanity Ironing Board Chrome VIB-20CR

Question 21

Is there a replacement for the plastic bushing type shaft cap for the Rev a shelf 39 inch half moon lazy susan? View answer

Asked 7 ´months ago | Half Moon Lazy Susans > Rev-A-Shelf 39" Polymer Half Moon 2 Shelf Pivot Lazy Susan White 6842-39-11-570

Question 22

Does woodworkers express sell the mounting screws for this plate? View answer

Asked 3 ´years ago | AVENTOS HK-S Lift System > Blum 0mm Inline Mounting Plate Wood Screws Blum 175H3100

Question 23

What are the special screws? View answer

Asked 7 ´months ago | Grass Nova Pro Scala Metal Drawer Boxes > Grass America Nova Pro Scala H186 Inset Panel Accessory Set Stone F102109513517

Question 24

Which hinges with this application on a frameless inset? This is a 90 dgree inside corner. View answer

Asked 7 ´months ago | Specialty Application Hinges > Blum 60 Degree CLIP Top Bi-Fold Hinge Self-Close Screw-on Blum 79T8500.10

Question 25

does it work with 71B959 View answer

Asked 3 ´years ago | Hinge Angle Restriction Clips > Blum 86° Restriction Clip for CLIP top and CLIP 107° Hinges Black Blum 74.1103

Question 26

I've bought this mechanism, but I'm seeking an alternative hinge option for the door. Unfortunately, I don't have the pre-drilled holes required for the supplied hinges to fit into the door View answer

Asked 2 ´years ago | Sugatsune Soft-Close Mechanism-Inset 11-13/16" Double Type IF-102W-14

Question 27

Does the T51.1901.PS L locking device adjust in and out up and down and side to side? Will this locking device work on undermount slide PR 550 Movento slide? View answer

Asked 3 ´years ago | Locking Devices > Blum TANDEM 563/569 Depth Adjustable Locking Device Right Blum T51.1901.PS R

Question 28

What are the best door weight range specifications for Aventos HL Systems? View answer

Asked 8 ´months ago | Aventos HL Systems

Question 29

How many pads per roll? View answer

Asked 2 ´years ago | Abrasive Pads and Sponges > Gold Sanding Sponge Rolls Aluminum Oxide 320 Grit WE Preferred

Question 30

Why is a non-handed design beneficial for Aventos HL Systems? View answer

Asked 8 ´months ago | Aventos HL Systems

Question 31

How tall should the cabinet be? I’d like to add it, so, I need to know how high I need to make it? It says 6” ? View answer

Asked 3 ´years ago | Tie and Belt Racks > 24" Pullout Tie Rack with Slides Natural Maple Rev-A-Shelf CWTR-2414-1

Question 32

How to measure a pantry cabinet for the best fit palister adjustable system? View answer

Asked 7 ´months ago | Kitchen Pilaster Systems > Rev-A-Shelf 2-3/8" W Tall Pantry Pilaster System 8 Pilasters/20 Brackets Maple 4PIL-54-238-1

Question 33

can you order with longer screws for cabinets View answer

Asked 2 ´years ago | Cabinet Knobs > Berenson Contemporary Advantage Four Knob 1-1/4" Dia Brushed Nickel 9432-4BPN-P

Question 34

What is the hinge plate item number? View answer

Asked 2 ´years ago | Pocket and Flipper Door Slides > Overlay Hinge Only-No Plate for 8080 Pocket Door Slide Nickel Knape and Vogt 8080 HKEZL

Question 35

Hi, i ordered this product and his came with bracket 3b not 3a like on photo, there is a chance to chose with bracket i can chose? View answer

Asked 2 ´years ago | LEGRABOX Drawer Box Kits > Blum LEGRABOX Pure with BLUMOTION H/D 26" F Height (9-1/2") Deep Drawer Box Kit Stainless Steel Blum 773F65S0I

Question 36

What is lead time on these? View answer

Asked 3 ´years ago | Undermount Drawer Slides > Blum 15" TANDEM plus BLUMOTION 563H Soft-Close Undermount Drawer Slide for 1/2" - 5/8" Drawer Side Blum 563H3810B

Question 37

What is the best mounting type for anti-tip solutions and why does it matter? View answer

Asked 7 ´months ago | Anti-Tip Solutions

Question 38

How does the number of drawers supported by an anti-tip solution affect my choice? View answer

Asked 7 ´months ago | Anti-Tip Solutions

Question 39

My drawer box is 23.5” deep. And my drawer sides are 1/2” thick. Can I use 563H5330B View answer

Asked 2 ´years ago | Undermount Drawer Slides > Blum 21" TANDEM plus BLUMOTION 563H Soft-Close Undermount Drawer Slide for 1/2" - 5/8" Drawer Side Blum 563H5330B

Question 40

What are the best grip and control features for hand sanding tools? View answer

Asked 8 ´months ago | Hand Sanding Tools

Question 41

What are the benefits of different sandpaper attachment methods in hand sanding tools? View answer

Asked 8 ´months ago | Hand Sanding Tools

Question 42

Is this White Fiesta Laminate sparkly and/or light catching in any way? The one small image does not do it justice. View answer

Asked 3 ´years ago | Pionite Laminate Sheets > White Fiesta 4X8 High Pressure Laminate Sheet .036" Thick Suede Finish Pionite MW550

Question 43

What is the best compatibility with drawer slides in anti-tip solutions? View answer

Asked 7 ´months ago | Anti-Tip Solutions

Question 44

Where do I find the pricing for 107" ladder? I only find 92" on Woodworker Express website. View answer

Asked 2 ´years ago | Rolling Library Ladder Components > E-Glide Satin Nickel Sliding Hook Ladder 12' Hardware Kit with 92" Prefinished Maple Ladder Customer Service Hardware EG.300-92MA-12.02-PF

Question 45

I need to have 1/8" to zero overlay on a face frame cabinet. Will this work using the 170° Half Overlay CLIP Top Hinge Self-Close screw-on Blum 71T6650? View answer

Asked 2 ´years ago | Hinge Mounting Plates > S-Type 6mm Zinc Face Frame Mounting Plate Screw On Titus 244.3655.650

Question 46

are backorders filled or do I need to reorder and pay the freight again? W1323393 03/03/2024 Thank You View answer

Asked 2 ´years ago | Soft-Close Adapters > Salice Smove Soft-Close Adapter for Universal Hinges Grey Salice DBDESN6

Question 47

What components are included in Aventos HL Systems sets? View answer

Asked 8 ´months ago | Aventos HL Systems

Question 48

square inches of shelf space View answer

Asked 2 ´years ago | Blind Corner Cabinet Organizers > Rev-A-Shelf 18" Single Tier Organizer for Blind Corner Right Maple Left Hand 5371-18-MP-L

Question 49

Why is the material of hand sanding tools important when choosing a product? View answer

Asked 8 ´months ago | Hand Sanding Tools

Question 50

What are the benefits of field cuttable Infinex Extrusion products? View answer

Asked 8 ´months ago | Infinex Extrusion

Browse by Topic