for these 16" brackets, is the inside flat dimension of the top of this bracket between the slotted wall channel and the raised tip on the end of this bracket 16"? or is it slightly less like 15.75 as there are common 16" shelf boards that are really only 15.75" wide that would lay flat? Trying to figure out what this dimension is so if I want to cut plywood for shelving boards what is the dimension that will lay flat and not lay on top of the raised bump at the end of these brackets? View answer
Asked 7 ´years ago | Shelf Standards and Brackets > 180 Series 16" Single Slotted Shelf Bracket White Knape and Vogt 180 WH 16
for a 28" (w) x 13" (tall) horizontally mounted cabinet door with two hinges at the top, do you need a stay on each side of the door or will a single stay on one side be adequate to hold the door open? View answer
Asked 7 ´years ago | Lid Supports and Stays > Sugatsune Adjustable Soft-Down Stay for Upward Opening Door LH Nickel NSDX-35LK
I want to mount my cabinet door to the drawer. I see a photo of it displayed with this product. Does door mount hardware come included to mount to door? View answer
Asked 7 ´years ago | Bottom Mount Trash Pull-Outs > Rev-A-Shelf RV-18PB-2 S Double 35 Quart Bottom Mount Waste Container White RV-18PB-2 S
What size is the knuckle? I need a 12 in. length, 2 in. width total hinge with the knuckle as small as possible like around 3/16 in. I need two to replace RV access/baggage door hinges...stainless or something that won’t rust easily...thanks View answer
Asked 6 ´years ago | Piano Hinges > Larsen & Shaw 1119GJ9NP 12in Piano Hinge, 2in Open Width, Nickel
Are the nylon bushings included? View answer
Asked 6 ´years ago | Pivots Hinges > Selby H704U, Pivot Hinge, Bright Nickel
how far from the edge should the Grass 02788A-15 TEC Adjustable Soft-close Hinge, Wrap Mount, 1/4 Overlay, Dowel, 42mm Boring Pattern be drilled? Do they 36 that I ordered come with screws? And above it states that Plate Required Yes and Plate Included Yes, which one is required? View answer
Asked 6 ´years ago | Concealed Compact Cabinet Hinges > Grass America TEC Soft-Close Hinge Wrap Mount 1/4 Overlay Screw-on 45mm Boring Pattern 04429A-15
Can you purchase th replacement can and storage bin seperately? If so what is the part number for the storage bin? I already have the part number for the 50 quart trash bin in gray. View answer
Asked 7 ´years ago | Top Mount Trash Pull-Outs > Rev-A-Shelf 4WCTM Top Mount Single 35 Quart Waste Container (Inset) Maple 4WCTM-12INDM-1
I have a question about CompX C8060-C346A-14A Disc Tumbler Cam Lock, 90 & 180-Degree Cam Turn, Flush or Lipped/Overlay, Keyed # 346, Bright Nickel. Will this lock replace the lock on a SNUGtop Pickup Cover for a 2002 Chevy Pick Up, both of the "tabs" broke. Sincerely, Danny A. Ferguson dannyferguson4@aol.com View answer
Asked 7 ´years ago | Disc Tumbler Cam Locks > CompX C8060-C346A-14A Disc Tumbler Cam Lock, 90 & 180-Degree Cam Turn, Flush or Lipped/Overlay, Keyed # 346, Bright Nickel
