How do wall mounted range hoods work? View answer
Asked 10 ´months ago | Wall Mount Range Hoods
What is the best angle of opening for glass door cabinet hinges? View answer
Asked 8 ´months ago | Glass Door Hinges
Hi - Thanks but it's the "depth" listed above, the 9 5/16" measurement that I need to know what it tapers down to at the bottom. Not lengthwise end-to-end, BUT ACROSS the bottom side-to-side! Thanks!! View answer
Asked 5 ´years ago | Replacement Bins & Accessories > 35 Quart White Replacement Waste Container Knape and Vogt QT35PB-WH
Are all bifold door hardware the same? View answer
Asked 9 ´months ago | Bi-Fold Door Hardware
How to fit euro screws? View answer
Asked 8 ´months ago | Euro Screws
Hello, I'm looking to pair a hinge and mounting plate systew on face frame inset doors. I need to raise the mounting plate to approx. - 27mm to 30mm to lift the hinge to nearly flush with the faceframe edge (just like a frameless). I noted a few Salice BAR options to accomplish this however, a matching screwed on hinge has too many options to narrow down. Please help! Thank you! View answer
Asked 2 ´years ago | Hinge Mounting Plates > Salice 30mm Wing Hinge Mounting Plate Screw-On Salice BAR3RM9
How do range hoods connect to power? View answer
Asked 9 ´months ago | Range Hood Blower Power Packs
How important is weight capacity for Kidney Lazy Susans? View answer
Asked 1 ´year ago | Kidney Lazy Susans
Do acrylic sinks scratch easily? View answer
Asked 9 ´months ago | Acrylic Undermount Sinks
I am installing cabinets with 3/4" face frames and Salice hinges. There is a blind corner with a lazy susan pivot post that leaves a little more than 1-1/4" clearance for blind corner hinges. How much does Salice c2r6n99am protrude into the cabinet from the back of the face frame? View answer
Asked 6 ´years ago | Blind Corner Cabinet Hinges > Salice C2R6N99AM, Blind Corner Hinge, Overlay, Dowel
What load capacity should I look for in casters? View answer
Asked 8 ´months ago | Casters
Installation of the undermount slides is complete and they work very well. I have on drawer that does not engage the slow close before the drawer withdraws. What is the process for increasing the soft action just before reaching the cabinet opening? Thanks Robert View answer
Asked 3 ´years ago | Epoxy Coated Euro Slides > Salice 22" Epoxy Coated Euro Self-Close Drawer Slide 3/4 Extension 75 lb Salice A208/55.1
I am still a bit confused, is the folding table leg set one bracket with two legs or is there two seprate brackets with the two legs on each bracket, enough to do both ends of a table? View answers
Asked 3 ´years ago | Table Legs and Bases > 29" x 24" Light Duty Folding Banquet Table Legs Set Black EBCO APF-B
What is the best blade size or stroke length for a saw, and why does it matter? View answer
Asked 7 ´months ago | Saws
What is the best material for an oil drain and drip pan? View answer
Asked 7 ´months ago | Oil Drain and Drip Pans
What is the rule for countersinks? View answer
Asked 5 ´months ago | Countersinks & Counterbores
Can you put wooden drawers in a bathroom? View answer
Asked 9 ´months ago | Wood Vanity Drawers
I want to flush mount these standards. I assume a router will work best. what is the routed width and depth? any rules how far those should be mounted from the front and back? 2 inches maybe? View answer
Asked 2 ´years ago | Pilasters and Clips > KV 255AL BR 24, 24in 255 Series Pilaster, Surface or Flush Mount, Brass Aluminum, Knape and Vogt
How to use a bit tip holder? View answer
Asked 8 ´months ago | Bits and Holders
