Question 1

Do you have the Rev-A-Shelf 432-VF26SC-3 in stock? View answer

Asked 4 ´years ago | Vanity Pull-Outs > Rev-A-Shelf 3" x 26" Vanity Filler Organizer Pull-Out with Soft-Close Rev-A-Shelf 432-VF26SC-3

Question 2

Does this foot have a pre-drilled hole for a screw? View answer

Asked 4 ´years ago | Bun Feet > Marseille Machined Wood Bun Foot 3-5/8" W x 4" H Hardwood Grand River BFP4-H

Question 3

What face frame plate should be used with hinge 71T6650 for partial inset doors View answer

Asked 4 ´years ago | Concealed European Cabinet Hinges > Blum 170° Half Overlay CLIP Top Hinge Self-Close Screw-on Blum 71T6650

Question 4

What is the different between this and 447-BCBBSC-5C? View answer

Asked 4 ´years ago | Base Cabinet Organizers > Rev-A-Shelf 5" Tray Divider/Foil and Wrap Organizer with BLUMOTION Soft-Close Maple Rev-A-Shelf 447-BCSC-5C

Question 5

Is the 16" the overall dimensions from the front of the hinge plate to the end of the slide? View answer

Asked 4 ´years ago | Pocket and Flipper Door Slides > 8092 16" Pocket Door Slide With Hinge Plates Black KV 8092SP EB 16

Question 6

IS this in stock ready to ship? View answer

Asked 4 ´years ago | Sanders > ETS-EC150/3 EQ-PLUS Sander-Systainer-Festool 576326

Question 7

What is the difference between the KV8500 and the KV8505? Also, does this include a pair? Or do I need to order the left and right slides individually? Thanks, Alec View answer

Asked 4 ´years ago | File Cabinet Drawer Slides > KV 8505P 30 30in 150lb Side Mount 1in Overtravel Ball Bearing Drawer Slide, Anochrome, Polybag, Knape and Vogt

Question 8

The builder of my chest used two Carlson Capitol 703LH hinges. I need to replace them. will a 703RH hole pattern line up? View answer

Asked 4 ´years ago | Lid Supports and Stays > Carlson Capitol 703-GREEN, Lid Support, 40-45ft lb

Question 9

what is the bottom length View answer

Asked 4 ´years ago | Drawer Slide Accessories > Blum Rear Mount Socket for 552/562/563 TANDEM Drawer Slides Blum 2956400

Question 10

How many screws are needed to install this product? View answer

Asked 4 ´years ago | Shelf Standards and Brackets > Heavy Duty Shelf Standard 78" Titanium Knape and Vogt 82 TI 78

Question 11

What height cabinet does this mantel fit? View answer

Asked 4 ´years ago | Wall Mount Range Hoods > Straight Accent 30" Wide Wall Mount Range Hood with Broan Liner Maple Omega National R5030SMB1MUF1

Question 12

what parts go with sku 11315445 View answer

Asked 4 ´years ago | AVENTOS HK-XS Lift System > Blum AVENTOS HK-XS Lift Mechanism Blum 20K1301

Question 13

what type of screws does this caster require View answer

Asked 4 ´years ago | Casters > 2" Light Duty Plate Mount Twin Wheel Swivel Caster With Brake Black DH Casters C-T20P1BKB

Question 14

what parts go with sku 11315445 View answer

Asked 4 ´years ago | AVENTOS HK-XS Lift System > Blum AVENTOS HK-XS Lift Mechanism Blum 20K1301

Question 15

What adhesives work best for 909 surface laminate? (refacing cabinets) View answer

Asked 4 ´years ago | 909 Surfaces Laminate Products > 909 Surfaces Laminate 102 Bright White, Vertical, .024 Thick, Matte, 4x8

Question 16

Is this product made of metal or plastic? View answer

Asked 4 ´years ago | Soft-Close Adapters > Blum 971A BLUMOTION Polybag Kit for Doors Blum 971A9700.22

Question 17

what is the disc vacuum hole pattern? 5 holes, 8 holes, or ? View answer

Asked 4 ´years ago | Sanders > 5" Dia. Vacuum-Ready Dynorbital Extreme Random Orbital Sander Dynabrade X52V

Question 18

Does this "set" come as a single piece bracket, or is it a pair for both left and right sides of the door? View answer

Asked 4 ´years ago | AVENTOS HK top Lift System > Blum AVENTOS Mounting Plate with Bracket Set for use with Large Overlay Five-Piece Doors Blum 20S4F01

Question 19

Do you have an installation guide for Omega National Interior Ductwork Kit for Broan Ventilators 250/390 CFM, 90358DUC1? View answer

Asked 4 ´years ago | Interior Ductwork Kit for Broan Ventilators 250/390 CFM Omega National 90358DUC1

Question 20

Is this product steel or aluminum View answer

Asked 4 ´years ago | RTA and System Fittings > Titus 006401.885.001 Bulk-100, System 6 Dowel (Panel to Panel Applications, Screw-In), 9mm Drilling Length for Dowel Thread, Zinc

Question 21

What screw size is needed for attachment into 3/4" thick plywood doors? View answer

Asked 4 ´years ago | Concealed European Cabinet Hinges > Blum 110° Full Overlay CLIP top BLUMOTION Soft-Close Hinge Onyx Screw-On Blum 71B3550-ONYX

Question 22

What drill bit size do I need? View answer

Asked 4 ´years ago | AVENTOS HK top Lift System > Blum Hinge TIP-ON In-Line Adapter Plate for Standard Doors White Blum 956.1004

Question 23

Can the Omega National 250 CFM Range Hood Ventilator Fan be used as a non-vented, recirculating fan? Our stove is not on an outside wall View answers

Asked 4 ´years ago | Omega National 250 CFM Range Hood Ventilator Fan, Broan, Silver Metallic, RHVBF10SM

Question 24

What’s the door opening to fit this shelf View answer

Asked 4 ´years ago | Blind Corner Cabinet Organizers > CORNERSTONE Swing Scalea Blind Corner Pull-Out for 21" Opening Carbon Steel Gray/Maple Vauth-Sagel

Question 25

I have an 18" opening and a 19.5" cabinet. Will this fit, or should I go with the 4WCSC-1835DM-2 option? View answer

Asked 4 ´years ago | Bottom Mount Trash Pull-Outs > Rev-A-Shelf 4WCSC Double 35 Quart Bottom Mount Waste Container Maple Rev-A-Shelf 4WCSC-2135DM-2

Question 26

Which screws do these go with, or what are the dims? View answer

Asked 4 ´years ago | Screw Cover Caps and Washers > Titus 001020.801.350 Bulk-1000, Knock-In Plastic Covercap, Phillips Screws, Almond

Question 27

Is there adhesive on the edge banding woodtape? if so, is this heat activated or pressure? View answer

Asked 4 ´years ago | PVC Edgebanding > PVC Edgebanding Sunday Stroll 15/16" X .020" 600 L/F Roll Woodtape 30759EFM-1520-1

Question 28

which lock plug works with this body? View answer

Asked 4 ´years ago | Lock Bodies > CompX Timberline CB-250 Lock Cylinder Body Only, Deadbolt Lock, Double Door Lock, Surface Mount, Lower left hand or upper right hand installation

Question 29

I need to know if your hardware set includes hardware to fasten the base and top of the rotating shelf shaft to the cabinet base (bottom) shelf and top top in order to mount 2 custom built (I will manufacture) 18" diameter shelves to rotate within the cabinet? I plan to build 6 cabinets with 2 rotating shelves each; Does this include all the hardware I will need if I simply build the shelves? View answer

Asked 4 ´years ago | Lazy Susan Hardware > Rev-A-Shelf 38"-46" Telescoping Shaft Full Circle Lazy Susan Hardware Set for Two Shelves Bulk-6 Rev-A-Shelf 6020-04P-426

Question 30

Are these hinges 35mm cup diameter? View answer

Asked 4 ´years ago | Concealed European Cabinet Hinges > 125° Full Overlay Hinge Self-Closing Screw-on WE Preferred

Question 31

how wide and deep View answer

Asked 4 ´years ago | Range Hood Blower Power Packs > VMI 04 BIS 280 CFM Range Hood Ventilator, Air Pro, Biscuit

Question 32

1 have 2- doors that are each 18" wide x 72" high. what do I need to order? View answer

Asked 4 ´years ago | Pocket and Flipper Door Slides > 8091 22" Pocket Door Slide Without Hinge Plates Black KV 8091SP EB 22

Question 33

does Blum 173H7100 0mm Cam Adjustable Baseplate, screw-on match this hinge Blum 73T3550 View answer

Asked 4 ´years ago | Concealed European Cabinet Hinges > Blum 110° Plus Full Overlay CLIP Top Hinge Self-Close Screw-on Blum 73T3550

Question 34

Does this work with SBM15-2-35WH ? View answer

Asked 4 ´years ago | Trash Pull-Outs: Replacement Pull-Out Bins and Accessories > Door Mount Bracket Kit Frosted Nickel Knape and Vogt PDMKTPT

Question 35

Are these made of solid wood or birch plywood? If plywood, is the top edge banded? Are they finished? What type of finish? Do you sell matching 1/4" bottom panels? View answer

Asked 4 ´years ago | 6" X 60" Wood Drawer Side 1/2" Thick Russian Birch Genesis Products

Question 36

what backplate works with C7P6AG9 by SALICE AMERICA, INC. View answer

Asked 4 ´years ago | Salice Silentia 110° Soft-Closing Hinge Full Overlay Screw-on Salice C7P6AG9

Question 37

What is the size or specificacion sheets for this model View answer

Asked 4 ´years ago | Rev-A-Shelf Aluminum Pull-Out Hamper Rev-A-Shelf 5190-15RM-111

Question 38

Hi, what is the minimum cabinet ipening for this item, the product details says 18" but i have istallation instructions for i beleive for this unit says 15"? View answer

Asked 4 ´years ago | Bottom Mount Trash Pull-Outs > ENVI BMT Saphir 18" Double 50 Quart Bottom Mount Waste Container Carbon Steel Gray Vauth-Sagel

Question 39

According to your website it states this product is 26" - 31" adjustable. My upper corner cabinet is 27" high. Will this fit? View answer

Asked 4 ´years ago | Full Round Lazy Susans > Rev-A-Shelf 16" Polymer Full Circle 2 Shelf Lazy Susan Almond Independently Rotating Rev-A-Shelf 6072-16-15-52

Question 40

I'm looking to replace a hinge that has a cup depth of 13.5mm. The 6th bullet item in the description says a cup depth of 15.5mm, but the information in product details says 13.5mm. Which is it? I am putting this on a door that is about 3/4" thick. Will it still work even though the description says "thick door". View answer

Asked 4 ´years ago | Salice Series 200 155° Thick Door Soft-Closing Hinge Full Overlay Dowel Salice C2RDAD9

Question 41

What is the weight total limit of the hooks? Thanks in advance, kb View answer

Asked 4 ´years ago | Base Cabinet Organizers > Rev-A-Shelf Glideware Kitchen Pot and Pan Organizer with Ball Bearing Slide System Maple GLD-W22-SC-7

Question 42

If I order a Set of pilasters how many pilasters will be in the box? View answers

Asked 4 ´years ago | Pilaster Systems > Quicktray Pilaster Side Mounting Bracket System 1-1/4" Cream Tenn-Tex B-522-02

Question 43

Can you add wheels to these legs? View answer

Asked 4 ´years ago | Table Legs and Bases > Folding Game Table Leg Set 1" Dia. x 29" H Black EBCO FL4

Question 44

how long to get rev a shelf 448-BBSCWC36-5C View answer

Asked 4 ´years ago | Wall Cabinet Organizers > Rev-A-Shelf 5" X 36" H Wood Pullout Wall Organizer with Soft Close Rev-A-Shelf 448-BBSCWC36-5C

Question 45

Can the width be cut/sized down to 12”? View answer

Asked 3 ´years ago | Cabinet Drawer Inserts > 13" W Spice Drawer Insert Baltic Birch Plywood Omega National S9513DNL1

Question 46

What dimmension does the 0mm refer to? View answer

Asked 3 ´years ago | Hinge Mounting Plates > Blum 0mm CLIP In-Line Mounting Plate with Cam Adjustment EXPANDO Blum 177H3100E

Question 47

This is the price for set of 2 lifts, one for the left and right? Or is it the price for 1 lift? The picture shows 2, but wanted to confirm. View answer

Asked 3 ´years ago | Aventos HL Systems > Blum AVENTOS HL Lift Mechanism for Door Weight 3lbs 5oz. to 10lbs 6oz Blum 20L2500.N5

Question 48

Is the vacuum system already included with this or does a vacuum system need to be purchased separately? View answer

Asked 3 ´years ago | Sanders > SurfPrep 3"x4" Surge Electric Sander, Central Vacuum, 3mm Stroke, Hook/Loop

Question 49

what size screws are packaged with the unit and how many ? brass or bronze View answer

Asked 3 ´years ago | Catches and Latches > Push Latch, Non-Magnetic , Metal Housing, Brass Plated Engineered Products (EPCO) 505-BP

Question 50

I have an opening that use to contain a trash compactor. Dimensions are: 15"w x 24"d x 35" h. would like to install a pull out base cabinet organizer. Do you have something that will work? I have a cabinet door front to install on front. View answers

Asked 3 ´years ago | Base Cabinet Organizers > Rev-A-Shelf 11" Base Cabinet Organizer with BLUMOTION Soft-Close Maple Rev-A-Shelf 448-BCSC-11C

Browse by Topic