Question 1

does this come with screws as well? View answer

Asked 7 ´years ago | Sink Tip-Out Trays and Accessories > Tenn-Tex T-900 Bulk-700, False Front Connector for 4-1/2 Opening, Tenn-Tex Series, White, 3/4 W x 5-1/2 L x 31/32Din

Question 2

Is the SKU 10401181 available in 72" lengths? View answer

Asked 7 ´years ago | Sliding Door Tracks & Guides > 12' Single Sheave Track Plain Finish Wrought Steel Knape and Vogt 455 STL 144

Question 3

Is it possible to purchase only the bins? View answer

Asked 7 ´years ago | Top Mount Trash Pull-Outs > Rev-A-Shelf 4WCTM Top Mount Double 27 Quart Waste Container (Full-access) White Rev-A-Shelf 4WCTM-15DM2-343-FL

Question 4

Is there a recommended screw for this false front clip sku#74724 View answer

Asked 7 ´years ago | Tenn-Tex B172/B173-100/BAG Snap-In False Front Plastic Clips, Tenn-Tex, Clear, 2 Piece Set, Pack-100 Sets

Question 5

How thick is this when it is folded? Like if it were folded between a wall and a shelf. View answer

Asked 7 ´years ago | Table Hardware > Vertical Mount Steel Drop Leaf Support Bracket 44lb Per Bracket Yellow Chromate Hafele 287.41.915

Question 6

Do you have 90 degree plastic corner brackets fo 5/8 shelf board? View answer

Asked 7 ´years ago | Shelf Edging > 90-Degree Plastic Corner Bracket 16" L White JJM Solutions H-313-002-WH

Question 7

Does the 16" Stealth Brace come with the screws? If not what kind and size is recommended. Thank You. View answer

Asked 7 ´years ago | Countertop Brackets > SpeedBrace Stealth Countertop Support 16" Black FastCap SB-16 STEALTH BL

Question 8

is this for face frame cabinet or frameless cabinet box View answer

Asked 7 ´years ago | Blum AVENTOS HK-S Lift Mechanism & Cover Set Stay Lift System Blum 20K2B00N1

Question 9

What are the edge distance of the holes and its spacing for KV 208 BLK 400 and KV 208 BLK 300? View answer

Asked 7 ´years ago | Shelf Brackets > Ultimate L-Bracket 15-19/32"x 10-19/32" Black Knape and Vogt 208 BLK 400

Question 10

What are the dimensions of holes for KV 208 BLK 400 and KV 208 BLK 300? View answer

Asked 7 ´years ago | Shelf Brackets > Ultimate L-Bracket 15-19/32"x 10-19/32" Black Knape and Vogt 208 BLK 400

Question 11

Is the finish of KV 208 BLK 400, powder coat or blacken steel? View answer

Asked 7 ´years ago | Shelf Brackets > Ultimate L-Bracket 15-19/32"x 10-19/32" Black Knape and Vogt 208 BLK 400

Question 12

Is there a switch-on/off-with-a-string option? View answer

Asked 7 ´years ago | Hera 3W ARF-LED Series LED Puck Light, Warm White, White, ARFLED3200WH

Question 13

What is the length of this shelf pin? Your site gives the length for the 5mm bore pin. View answer

Asked 7 ´years ago | Shelf Supports > 1/4" Spoon Shaped Metal Shelf Support Nickel 100-Pack WE Preferred IF739NP

Question 14

What is the difference between a platen pad assembly a platen pad protector there is no difference in their images. View answer

Asked 7 ´years ago | Graphite Platen Pad Bosch 3601010509

Question 15

Does this product come in a larger size to hold a larger diameter rod? View answer

Asked 7 ´years ago | Closet Rods and Flanges > Center Support Bracket for Adjustable Closet Rods AnochromeKnape and Vogt 29201 ANO

Question 16

Is the $28.76 price for the set of 4 legs. Or is it for each individual leg, as it states that it is sold in multiples of 1. Thanks. View answer

Asked 6 ´years ago | Table Legs and Bases > Folding Game Table Leg Set 1" Dia. x 29" H Black EBCO FL4

Question 17

Can each belt hook hold more than one belt? View answer

Asked 6 ´years ago | 12" Side Mount Belt Rack Oil Rubbed Bronze Rev-A-Shelf BRC-12ORB

Question 18

Does the leg adjustment on the Meier 615-70-C1 increase the leg by 1 1/8" or decrease? View answer

Asked 6 ´years ago | Table Legs and Bases > Hamburg Table Leg Set 2-3/8" Dia x 27-3/4" H Chrome Set of 4 Peter Meier 615-70-C1

Question 19

Hi there, Do you sell a hamper liner for this product? Thanks, Connie View answer

Asked 6 ´years ago | KV H1518-W, 71QT Pull-Out Wire Hamper Basket System, 15-1/8 W x 18-3/4 D x 18-7/8 H, White, Knape and Vogt

Question 20

Can I order just the hinges for tip-out trays? View answer

Asked 6 ´years ago | Sink Tip-Out Trays and Accessories > Rev-A-Shelf 16" Stainless Steel Sink Tip-Out Tray Set with Hinges Rev-A-Shelf 6541-16-52

Question 21

How do you modify bracket installation for frame cabinets? View answer

Asked 6 ´years ago | Built-In Trash Pull-Outs > Rev-A-Shelf 20 Liter Pivot-Out Waste Container White Rev-A-Shelf 8-700411-20

Question 22

I am needing something to keep a toy box lid locked in open position, so my son can't close it. I also need it so that I can close it when needed. Do you think this piece will work. View answer

Asked 6 ´years ago | Lid Supports and Stays > Delta Lift-Up or Drop-Down Lid Mechanism PMI 810.100.060

Question 23

What is the width with trim. View answer

Asked 6 ´years ago | Wall Mount Range Hoods > Emperor 30" Wide Wall Mount Range Hood No Liner Maple VMI FDWHEMP 30 M

Question 24

what Is the width with trim? View answer

Asked 6 ´years ago | Wall Mount Range Hoods > Decorative 30" Wall Mount Range Hood No Liner Maple VMI FDWH 30 M

Question 25

Which Hinge Plate should I use for the Blum 79B9550 95 Degree CLIP Top Blind Corner Hinge? View answer

Asked 6 ´years ago | Blind Corner Cabinet Hinges > Blum CLIP Top BLUMOTION Blind Corner 95 Degree Inset Hinge Screw-On Blum 79B9550

Question 26

Please let me know how the 2 halogen lights can be removed. Are they the twist-on or rotate-off type. Thank you View answer

Asked 6 ´years ago | Range Hood Blower Power Packs > Omega National Sirius 960 CFM Ventilator, Stainless Steel, SUT90870M

Question 27

Would I use a #4 screw with these? View answer

Asked 6 ´years ago | Pilasters and Clips > KV 255 BR 96, 96in 255 Series Pilaster, Surface or Flush Mount, Brass, Knape and Vogt

Question 28

Do you carry this in white? KV PC28STM-W, 28in WHITE? View answer

Asked 6 ´years ago | KV PC28STM-FN, 28in Wire Kidney Shaped Lazy Susan, KV Series, Frosted Nickel, 2-Shelf Set with Hardware, Independently Rotating, Knape and Vogt

Question 29

is it smoothed out? View answer

Asked 6 ´years ago | Dowel Rods and Pins > Excel Dowel DR-1436-R, Dowel Rod, Unfinished Hardwood 1/4 x 36in

Question 30

Do you know if these will work on my KraftMade cabinets? View answers

Asked 6 ´years ago | Hinge Angle Restriction Clips > Blum Compact BLUMOTION 86 Degree Restriction Clip Blum 38C315B3.1

Question 31

do you have a jig for the 45mm bore for the soft close hinge? View answer

Asked 6 ´years ago | Concealed Compact Cabinet Hinges > Grass 02791A-15 TEC Adjustable Soft-Close Hinge, Wrap Mount, 1/4 Overlay, Dowel, 45mm Boring Pattern

Question 32

Wha the size mounting plate do I need View answers

Asked 6 ´years ago | Concealed European Cabinet Hinges > 110° Full Overlay Hinge Soft-Closing Dowel WE Preferred

Question 33

What size mounting plate do I need View answer

Asked 6 ´years ago | Concealed European Cabinet Hinges > 110° Half Overlay Hinge Soft-Closing Dowel WE Preferred

Question 34

Product dimensions please View answer

Asked 6 ´years ago | KV S07835SC-48, Pull-Out Closet Mirror, Silver Mist, Knape and Vogt

Question 35

What is measurment of this item VMI FDWHAC 30 RO Arched Corbel Range Hood, Wall, 30in, Red Oak View answer

Asked 6 ´years ago | Wall Mount Range Hoods > Arched Corbel 30" Wide Wall Mount Range Hood No Liner Red Oak VMI FDWHAC 30 RO

Question 36

I ordered a 30 inch wide plate holder but it came 28 and 1/4 inches wide. is that right? View answer

Asked 6 ´years ago | Omega National P2202MUF2, 30in Plate Display Rack - Angled, Maple, 1-Pair (front/back)

Question 37

What is the with of this range with trim? View answer

Asked 6 ´years ago | Wall Mount Range Hoods > Keystone 30" Wide Wall Mount Range Hood No Liner Maple VMI FDWHKS 30 M

Question 38

do you sell the replace bins for this? KV RRC28K-W Triple 32QT Specialty Corner Recycling Center, White, Knape and Vogt View answer

Asked 6 ´years ago | Built-In Trash Pull-Outs > Triple 32 Quart Revolving Recycling Center White Knape and Vogt RRC28K-W

Question 39

can this be trimmed to fit 16.37w x 19D x 3-1/4 H. View answer

Asked 6 ´years ago | Plastic Cutlery Insert 17-3/4" W Glossy White KV 1775-W

Question 40

What is the depth dimension? View answer

Asked 6 ´years ago | Wall Bed Frame and Mechanism Kits Twin / Single size Vertical Opening (Cabinet not included)

Question 41

Does this product fit a 14in shelf or is the overall length 14in? If so, what is the measurement from the wall to the bracket lip? View answer

Asked 6 ´years ago | Shelf Standards and Brackets > 180 Series 14" Single Slotted Shelf Bracket Anochrome Knape and Vogt 180 ANO 14

Question 42

Does this product fit a 10in shelf or is the overall length 10in? If so, what is the measurement from the wall to the bracket lip? View answer

Asked 6 ´years ago | Shelf Standards and Brackets > 180 Series 10" Single Slotted Shelf Bracket Anochrome Knape and Vogt 180 ANO 10

Question 43

Does this product fit a 12in shelf or is the overall length 12in? If so, what is the measurement from the wall to the bracket lip? View answer

Asked 6 ´years ago | Shelf Standards and Brackets > 180 Series 12" Single Slotted Shelf Bracket Anochrome Knape and Vogt 180 ANO 12

Question 44

Where can I get the hinge plate? View answer

Asked 6 ´years ago | Pie-Cut Corner with Bi-Fold Center Door Hinges > Grass F045138517228 Tiomos Pie Corner Hinge, Screw-on

Question 45

I just ordered 58" pull out shelf unit as new customer. Do I get a new customer discount? View answer

Asked 6 ´years ago | 8" Wood Tall Cabinet Pullout Pantry Organizer with Soft-Close 58" Tall Rev-A-Shelf 448-TP58-8-1

Question 46

what is the max shelf width for pull out unit to be used in a 12" OD (10.5" inside ) cabinet? View answer

Asked 6 ´years ago | 8" Wood Tall Cabinet Pullout Pantry Organizer with Soft-Close 58" Tall Rev-A-Shelf 448-TP58-8-1

Question 47

what is the max opening height for the cabinet to house the 58" tall shelf unit? View answer

Asked 6 ´years ago | 8" Wood Tall Cabinet Pullout Pantry Organizer with Soft-Close 58" Tall Rev-A-Shelf 448-TP58-8-1

Question 48

bought one of the jjm corners, looks like it might work but i need to cut it. What kind of tool is best to cut that type of plastic. Tks John View answer

Asked 6 ´years ago | Shelf Edging > 90-Degree Plastic Corner Bracket 14" L Almond JJM Solutions H-313-001-CCAL

Question 49

is measurement quoted at top lip of can or below it on the smooth edge? View answer

Asked 6 ´years ago | Trash Pull-Outs: Replacement Pull-Out Bins and Accessories > Rev-A-Shelf 30 Quart Almond Replacement Waste Container Rev-A-Shelf 6700-61-15-52

Question 50

We would like to use this as a spacer to fill a gap between a washer and a dryer. It would need to stand alone and be supported by no extra hardware but would fit snugly in the gap. Is this feasible with your 6 incjh wide model? View answer

Asked 6 ´years ago | Base and Wall Cabinet Fillers > Rev-A-Shelf 6" Base Filler Pullout Rev-A-Shelf 432-BF-6C

Browse by Topic