12" x 96T Non Melt Plexi-Glass Table and Radial Arm Saw Amana Tool LB12961

When cutting acrylics and plastics, "chip-welding" – a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2° negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.

Excellent for Cutting:

• Plastics
• Acrylonitrile Butadiene Styrene (ABS)
• Acetal
• Acrylic
• Acrylic Sheets
• Alupanel®
• Copolymer
• Coroplast®*
• Correx Boards
• Corrugated Polypropolyene
• Delrin
• Ethylene-Vinyl Acetate
• Foam Board
• Gatorfoam®**
• High Density Polyethylene (HDPE)
• High Impact Polystyrene (HIPS)
• Low Density Polyethylene (LDPE)
• Lucite®
• Mechanical/Engineered Plastics
• Nitrile Rubber

• Nylon
• Perspex® Cast Acrylic Sheet
• Plastic Laminate Flooring
• Plexiglas®
• Poly (methyl methacrylate) (PMMA)
• Polycarbonate (Lexan™)
• Polyethylene (PE)
• Polyethylene Terephthalate (PET)
• Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
• Polypropylene (PP)
• Solid Surface
• Styrene-Acrylonitrile
• Styrene-Butadiene Rubber (SBR)
• Styrene-Isoprene-Styrene (SIS)
• Teflon®
• Thermoplastic Polyolefin (TPO)
• Trespa® Meteon®***
• Ultra High Molecular Weight Polyethylene (UHMWPE)
• Wood