Crosscut Station Kreg KMA4100

Get miter saw quality from your circular saw

The Crosscut Station gives you the capabilities of a miter saw with just a circular saw and Kreg guided cutting. Crosscut boards wider than most compound miter saws can handle (up to 12" at 90°). Make a variety of angle and miter cuts from 0° to 45° with the adjustable fence and molded-in angle alignments. 
An MDF base and SureCut backboard act as a sacrificial surface for splinter-free cutting results. The MDF base also functions as a kerf line so you can clearly see the blade’s path and know exactly where your saw will cut every time. 
Use material support wings and the detachable blocks to cut long boards safely by supporting your offcuts. They pull out easily when more support is needed, and tuck back in when not in use. The Crosscut Station is quick to set up and easy to store away. Its compact design even makes it portable when you need accurate crosscuts and angle cuts on the go. 

• Crosscut up to 12" wide and make a variety of miter cuts from 0° to 45°
• See exactly where your saw will cut with a kerf line you cut into the MDF base 
• Get splinter-free cuts with the MDF base and backboard that act as sacrificial surface
• Material support wings with detachable blocks add offcut support for long pieces
• Works with left- or right-blade circular saws

Includes:

• Crosscut Station with Guide Rails
• Built-in Material Hold-Down Clamps
• Adjustable Fence
• Owner's Manual