Titeshield Multi-Purpose Sealant 10.1oz Clay Titebond 3335-1

Titebond TiteShield Sealant is a high performance, multi-purpose, elastomeric sealant that provides a weatherproof shield against the elements. It is ideal for windows, doors, siding, trim and most construction and repair applications. This VOC-compliant, low odor formula remains flexible and will not crack or get brittle with age. It can fill gaps up to 2” wide, expand and contract up to 50% of joint size and will not sag or drool due to the non-stringing formula.

• Ideal for sealing windows, doors, siding, trim, vents and baseboards for interior and exterior applications 
• Seals siding, windows, doors, trim, PVC, glass, wood, metal, aluminum, masonry, marble, briock, stone, concrete, ceramic tile and most common building materials
• Joint movement capability ± 50%
• Paintable
• Fills gaps up to 2"
• VOC-Compliant
• Interior and exterior
• 9 colors
• Remains flexible - will not crack

APPLICATION TEMPERATURE:

• Above 40°F (4°C)

SERVICE TEMPERATURE RANGE:

• -25°F to 180°F (-31°C to 82°C) white and colors, 0°F to 160°F (-18°C to 71°C) clear

METHOD OF APPLICATION:

• Cartridge/caulking gun

WORKING TIME:

• Approximately 10-15 minutes for a 1/4" bead

APPLICATION DIRECTIONS:

1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2” in depth.
2. Cut tip at 45° angle for 1/8” to 1/2” bead and place in cartridge gun.
3. Apply sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.

PAINTING:

• The sealant should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. Clear is paintable in 4-6 hours.

CLEANUP:

• Clean uncured material with water. After curing, excess caulk must be cut or scraped away.